I was wondering just what the fret board radius was on the Ventures Mark1 Mosrite? I am thinking about doing some fret work on mine and would like to clean up the surface of the finger board at the same time.
Jim
Fret board radius
-
sleeperNY
- Top Producer
- Posts: 731
- Joined: Tue May 06, 2008 7:38 am
- Location: Central NY
- Contact:
Fret board radius
Gretsch-6122-58
Gretsch-6122-59
Gretsch-6120-vs-55
NOS Partsright Mosrite by Jim
Hallmark 60 Custom
Fender Twin Custom 15 Fender Tone Master Twin
Fender Bassman 59 LTD
Peavey Delta Blues
Korg AX3000G
Gretsch-6122-59
Gretsch-6120-vs-55
NOS Partsright Mosrite by Jim
Hallmark 60 Custom
Fender Twin Custom 15 Fender Tone Master Twin
Fender Bassman 59 LTD
Peavey Delta Blues
Korg AX3000G
-
Dennisthe Menace
- Moderator
- Posts: 4981
- Joined: Mon May 05, 2008 8:40 pm
- Location: Ft Lauderdale Florida
- Contact:
Re: Fret board radius
Jim,
I thought I had that info but I do not
.
But I'm sure one of our Pro Guitar Luthiers
will chime in with the correct info
......
I thought I had that info but I do not
. But I'm sure one of our Pro Guitar Luthiers
will chime in with the correct info
......make the Mos' of it, choose the 'rite stuff.
.........Owner of 9 Mosrites...
.....proud owner and documented:
1963 "the Ventures" Model s/n #0038
http://www.thevintagerockproject.com/
.........Owner of 9 Mosrites...
.....proud owner and documented:
1963 "the Ventures" Model s/n #0038
http://www.thevintagerockproject.com/
-
dubtrub
- Administrator
- Posts: 3852
- Joined: Sun May 04, 2008 10:12 am
- Contact:
-
oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: Fret board radius
i thought i saw on ed's step by step build thread, that he uses a 10" radius on his mosrite remakes....
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Return to “Mosrite & Clone, Projects, Parts & Accessories Q&A”
Who is online
Users browsing this forum: No registered users and 37 guests