Bridge measurements

Post Reply
User avatar
KRamone27
Master Contributor
Posts: 1325
Joined: Mon May 05, 2008 1:38 pm
Location: Carterville, IL
Contact:
Contact KRamone27

Bridge measurements

Postby KRamone27 » Fri Feb 18, 2011 1:45 pm

I had these written down somewhere but can't for the life of me find them. Does anyone have measurements for a mosrite roller bridge? I basically need the overall length of the bridge width and diameter of the saddles. Thanks, Kevin
Top
User avatar
KRamone27
Master Contributor
Posts: 1325
Joined: Mon May 05, 2008 1:38 pm
Location: Carterville, IL
Contact:
Contact KRamone27

Re: Bridge measurements

Postby KRamone27 » Sun Feb 20, 2011 8:35 pm

37 views and nobody has a tape measure?
Top
User avatar
Sarah93003
Master Contributor
Posts: 3812
Joined: Tue Mar 10, 2009 4:26 pm
Location: Westlake Village, CA
Contact:
Contact Sarah93003

Re: Bridge measurements

Postby Sarah93003 » Sun Feb 20, 2011 9:02 pm

I don't have a roller bridge, but I have a non-roller bridge. Will that do?
____________________
1965 Mosrite Celebrity Prototype with Vibramute
1972 Mosrite Celebrity-III
1977 Gibson MK-53
1982 Fender Bullet
1994 Gretsch Streamliner G3155 Custom
2005 Gibson Les Paul Standard Plus
2006 Jude Les Paul 12 String
Top
User avatar
Veenture
Master Contributor
Posts: 4127
Joined: Sat Jan 03, 2009 12:07 pm
Location: The Netherlands
Contact:
Contact Veenture

Re: Bridge measurements

Postby Veenture » Mon Feb 21, 2011 1:49 am

KRamone27 wrote:37 views and nobody has a tape measure?
I do...but not a Mo' :(
Top
User avatar
KRamone27
Master Contributor
Posts: 1325
Joined: Mon May 05, 2008 1:38 pm
Location: Carterville, IL
Contact:
Contact KRamone27

Re: Bridge measurements

Postby KRamone27 » Mon Feb 21, 2011 8:07 am

Sarah93003 wrote:I don't have a roller bridge, but I have a non-roller bridge. Will that do?



It should work perfectly, I think the only difference is the saddles. Thanks Sarah
Top
User avatar
Sarah93003
Master Contributor
Posts: 3812
Joined: Tue Mar 10, 2009 4:26 pm
Location: Westlake Village, CA
Contact:
Contact Sarah93003

Re: Bridge measurements

Postby Sarah93003 » Mon Feb 21, 2011 10:09 am

If you PM your email address to me, I'll make a sketch and pdf it.

The base of the bridge is 3 1/4" long by 13/16" wide. The sides are approximately 1/4" tall and scalloped. The material is 1 16" thick. I believe it is brass. The non-roller saddles are 5/16" diameter brass. The mounting holes are 2 25/32" on center. The bridge base is curved to match the radius of the neck.

Hope that helps!
____________________
1965 Mosrite Celebrity Prototype with Vibramute
1972 Mosrite Celebrity-III
1977 Gibson MK-53
1982 Fender Bullet
1994 Gretsch Streamliner G3155 Custom
2005 Gibson Les Paul Standard Plus
2006 Jude Les Paul 12 String
Top
Post Reply

Return to “Mosrite & Clone, Projects, Parts & Accessories Q&A”

Who is online

Users browsing this forum: No registered users and 51 guests