Ventures II decal size

[SeanTheFunky]

Could anyone please tell me how large the decal for a Ventures II is? or just the logo measurements in general?

thanks folks

[oipunkguy]

the size on the original version from 65, or the reissues? the japanese reissues decals are a little smaller.

[SeanTheFunky]

Alright man!
Sorry for being a bit of a pain, but we managed to get the measurements, now we just have to find someone to make the darn decals!

[oipunkguy]

I use to use a decal maker in england, you should be able to find him on a google search, but I'll try to find it again for ya. if you don't have any luck you could try my brother.

viewtopic.php?f=20&t=5062

good luck.

[oipunkguy]

this is who i think i use to use, i'm not sure because the website has changed a lot. www.guitardecals.co.uk

one word of advice, decals are usually printing with a laser jet printer. when you get the decal. handle it very carefully. it is possible the literally knock the ink right off the paper. lay the decal down flat and spray a very very thin dry coat of clear gloss lacquer over it. use a rattle can, a gun would be too heavy in most cases. put on at least 4 coats, very thin and dry. this will prevent the ink from flaking off the decal. I have to stress the thin lacquer coats because if the decal get just a hair too wet the decal paper will shrivel and it will be ruined.

if you need any advice placing the decal, let me know. hope this helps.