The GAUGE PAGE

User avatar
Dennisthe Menace
Moderator
Posts: 4981
Joined: Mon May 05, 2008 8:40 pm
Location: Ft Lauderdale Florida
Contact:

The GAUGE PAGE

Postby Dennisthe Menace » Wed Dec 17, 2008 12:14 pm

OK....EVERY other Guitar Forum seems to have a String Thread, and EVERYONE likes to suggest
what their favorite gauge or brand of strings are, or what they had luck (or no luck) in using.
Naturally, EVERYONE will not have the same preference, due to possibly the style of music they
are playing, their technique of playing, or their attack to the strings alone.
So with that being said, let the String Bending and Popping begin :mrgreen: ...............
make the Mos' of it, choose the 'rite stuff.
.........Owner of 9 Mosrites...
.....proud owner and documented:
1963 "the Ventures" Model s/n #0038
http://www.thevintagerockproject.com/

User avatar
KRamone27
Master Contributor
Posts: 1325
Joined: Mon May 05, 2008 1:38 pm
Location: Carterville, IL
Contact:

Re: The GAUGE PAGE

Postby KRamone27 » Wed Dec 17, 2008 3:55 pm

I use to use D'Adario .009-.042 but switched to Ernie Ball super slinkies cause they are cheaper and last longer but both had the same sound quality I like when matched with my strat with a seymour duncan sh-4 humbucker in the bridge position. Lots of rich harmonics, punchy lows and great mids.

User avatar
sleeperNY
Top Producer
Posts: 731
Joined: Tue May 06, 2008 7:38 am
Location: Central NY
Contact:

Re: The GAUGE PAGE

Postby sleeperNY » Thu Dec 18, 2008 6:39 am

All my guitars are setup with D'Addario EXL115W's. They last as long as I need them to and sound good.
I will say that I have used almost every brand out there through the years and have had good results with all of them.

Jim
Gretsch-6122-58
Gretsch-6122-59
Gretsch-6120-vs-55
NOS Partsright Mosrite by Jim
Hallmark 60 Custom
Fender Twin Custom 15 Fender Tone Master Twin
Fender Bassman 59 LTD
Peavey Delta Blues
Korg AX3000G

User avatar
Dennisthe Menace
Moderator
Posts: 4981
Joined: Mon May 05, 2008 8:40 pm
Location: Ft Lauderdale Florida
Contact:

Re: The GAUGE PAGE

Postby Dennisthe Menace » Thu Dec 18, 2008 11:58 am

Just to add another spark into the fire, does anyone experiment by
making up their own "Custom Gauges" and is it the same gauge set-up
on all your guitars? :roll:
make the Mos' of it, choose the 'rite stuff.
.........Owner of 9 Mosrites...
.....proud owner and documented:
1963 "the Ventures" Model s/n #0038
http://www.thevintagerockproject.com/

User avatar
MWaldorf
Site Admin
Posts: 3264
Joined: Sat May 24, 2008 1:21 pm
Location: Alameda, California
Contact:

Re: The GAUGE PAGE

Postby MWaldorf » Thu Dec 18, 2008 12:35 pm

I've got D'Addario 10-46 rounds (XL110 I think) on my Mosrites. I had been using 12s on my Jazzmaster and 13s on my Jaguar, both Chromes, but recently put 10 rounds on my Jazzmaster and 11 Chromes on my Jaguar, just to get a sense of them. My preference is for D'Addario strings, mainly because I really like the Chromes over other flats, but I haven't experimented much with rounds.

As for custom sets, when I had my Jaguar baritone (RIP) I would get DAddario chromes in 13 gauge, drop the 13 and add a 75, and 26 plain instead of the 26 wound.

Mel
Oy vey - it's MESHUGGA BEACH PARTY - The world's premier Jewish Surf Music Band!

Image

What? Couldn't tell the logo is a link? So click here, what's the hold up? http://www.meshuggabeachparty.com

Strat-o-rama
Top Producer
Posts: 682
Joined: Wed May 07, 2008 12:51 pm
Location: Boca Raton, Florida USA
Contact:

Re: The GAUGE PAGE

Postby Strat-o-rama » Fri Dec 19, 2008 1:50 pm

For the Strats, the Tele and the Hallmark: 10-46 D'Addario rounds.
For the Jazzmaster: The .11 D'Addario Rounds
For the ES295: 12's

Pretty basic. If I were gigging steadily, it might be different.

User avatar
gplayer
Top Producer
Posts: 433
Joined: Sat Dec 27, 2008 4:36 am
Location: Fl
Contact:

Re: The GAUGE PAGE

Postby gplayer » Sun Dec 28, 2008 6:39 pm

Most of my guitars are strung with XL110's. But, I've been using EXL110+ on my Les Paul. I kind of like them.

User avatar
ElTwang
Top Producer
Posts: 617
Joined: Mon Jun 16, 2008 11:51 am
Location: Copenhagen, Denmark
Contact:

Re: The GAUGE PAGE

Postby ElTwang » Mon Dec 29, 2008 2:38 pm

I've recently been using a brand called John Pearse 011's. They sound and feel great!
Am considering to try those on my Mosrite Excellent although all of you claim that 10s are the way to go with Mosrite. I'm trying but darn it feels like playing with rubber bands ;-).

brunob
Senior Member
Posts: 112
Joined: Sat Aug 23, 2008 9:36 am
Location: Italy
Contact:

Re: The GAUGE PAGE

Postby brunob » Thu Jun 25, 2009 3:08 am

stratocaster-yamaha sgv 800-Mosrite Ranger:ernie ball 0.10
65 jazzmaster-65 jaguar-dipinto galaxie 4 :ernie ball 0.11,feel very confortable with them.
Bruno

User avatar
jnslobaugh
Top Producer
Posts: 247
Joined: Sun Aug 17, 2008 1:06 pm
Location: SAN DIEGO or a town near you
Contact:

Re: The GAUGE PAGE

Postby jnslobaugh » Thu Jun 25, 2009 2:48 pm

D'Addario 10 - 52 nickles.
Phatt cutting lows
Sharp clean Highs

Longevity = How long does any set of strings last anyway.
Play every day
wipe em down when you put her to bed
JEFFREY S. LOBAUGH


Return to “Mosrite & Clone, Projects, Parts & Accessories Q&A”

Who is online

Users browsing this forum: No registered users and 67 guests