strings gauge-Ranger-Excellent

Post Reply
brunob
Senior Member
Posts: 112
Joined: Sat Aug 23, 2008 9:36 am
Location: Italy
Contact:
Contact brunob

strings gauge-Ranger-Excellent

Postby brunob » Sat Mar 28, 2009 4:21 am

I put some 0.10 on the Ranger,but I wander to go 0.11 ,are there no problem.
The E slot seems to be made for 0.10.
are the -excellent-different stuff ?
thanx Bruno :twisted:
Top
User avatar
FritzCat
Top Producer
Posts: 269
Joined: Sun May 04, 2008 5:52 pm
Location: Sonoma, CA
Contact:
Contact FritzCat

Re: strings gauge-Ranger-Excellent

Postby FritzCat » Sat Mar 28, 2009 9:03 am

I put 11's on my Excellent and like it better than 10's. I did have to play around with the spring, as the higher tension would pull the arm too close to the body for my liking.
Top
brunob
Senior Member
Posts: 112
Joined: Sat Aug 23, 2008 9:36 am
Location: Italy
Contact:
Contact brunob

Re: strings gauge-Ranger-Excellent

Postby brunob » Sat Mar 28, 2009 9:15 am

which spring size will be good for 0.11?
thanx Bruno :twisted:
Top
User avatar
Chemo
Top Producer
Posts: 226
Joined: Thu Aug 28, 2008 3:44 am
Location: Kirkkonummi, Finland
Contact:
Contact Chemo

Re: strings gauge-Ranger-Excellent

Postby Chemo » Mon Mar 30, 2009 12:11 am

brunob wrote:which spring size will be good for 0.11?
thanx Bruno :twisted:


The original spring that came with my Ranger is just fine with 11-set. You could just try & change the strings and see how the arm settles.

It will be a good idea to do this before you take your guitar to the pro, so you'll have the setup made for the right gauge... ;)
This concludes my report from outer space. Now, back to studio!
Top
Post Reply

Return to “Modern Mosrites & Clones”

Who is online

Users browsing this forum: No registered users and 34 guests